BRAND + DEVICE
AEG Washer-dryers error codes
Verified error codes, explanations, and safe checks for AEG Washer-dryers.
15 verified guides · 2 device groups
Before you start
- Note the full display code and model number, not only the brand.
- Compare the summary below with what your appliance is doing. A different code or symptom needs a different guide.
- Open the guide sources and check their device and model scope. Follow only checks intended for the owner.
This directory lists verified fault codes for AEG Washer-dryers. Each card opens a full guide with likely causes, owner-safe checks, and a clear stop point for professional service.
Match the code on the display, or browse by verification quality. Use the links below to return to all AEG devices or every brand under Washer-dryers.
Browse by device or brand
Internal links to groups that already have verified fault guides.
All guides in this directory
Sorted by verification quality score.
E10
›
C1
›
E20
›
C2
›
E30
›
C3
›
E40
›
E50
›
C9
›
EF0
›
EF3
›
E90
›
E91
›
E92
›
E93
›
AEG washer-dryer error E10: water intake or drainage problem
E10 usually means the washer-dryer is not receiving enough water or has detected a related drainage restriction. It is not, by itself, evidence of a drying-syst...
AEG Washer Dryer Error Code C1: Water Fill or Drainage Issue
Error code C1 indicates that the washer dryer is unable to take in water, is filling too slowly, or has encountered a drainage or pressure-sensing problem. It c...
AEG washer-dryer error code E20: drainage problem
E20 means the washer-dryer has detected a problem draining or pumping out water. The usual causes are a restricted drain hose, blocked pump filter, obstructed h...
AEG Washer Dryer Error Code C2 (Drainage / Pump Fault)
Error code C2 (often accompanied by 2 beeps or 2 flashes, and equivalent to E20) indicates that the washer dryer cannot pump out water within the expected time...
AEG Washer Dryer Error Code E30 (or C3 / 3 Beeps)
Error code E30 (often accompanied by C3 or 3 beeps) indicates that water has accumulated in the bottom tray or a water level sensor fault has occurred, triggeri...
AEG Washer Dryer Error Code C3: Water Detected in Base Tray
Error code C3 (often alternating with E30 or indicated by 3 beeps) signals that water has leaked into the appliance's bottom base tray, activating the Aqua Cont...
AEG Washer Dryer Error Code E40 (Door Lock / Closure Issue)
Error code E40 (often accompanied by 4 beeps or 4 LED flashes) indicates that the washer dryer door is open, improperly closed, obstructed by laundry, or has a...
AEG washer-dryer error code E50: motor fault
On an AEG washer-dryer, E50 indicates a motor-related fault. The exact cause cannot be identified without the appliance model and PNC, so do not apply E50 expla...
AEG Washer Dryer Error Code C9: Motor Fault or Spin Imbalance
Error code C9 on an AEG washer dryer indicates a drive motor failure, worn motor bearings, worn motor carbon brushes, or a severe drum imbalance during the spin...
AEG Washer Dryer Error Code EF0: Anti-Flood Device Activated or Over-Foaming
Error code EF0 (also displayed as EFo, EF3, or 15 beeps/flashes) indicates that the washer dryer has detected a water leak risk or over-foaming condition, trigg...
AEG Washer Dryer Error Code EF3: Aqua Control / Water Leak Warning
Error code EF3 (part of the EF0 group or 15 beeps/flashes) indicates that the aqua-control flood protection system has activated. Water or excessive foam has le...
AEG washer-dryer error E90: electronic configuration or communication fault
AEG groups E90 with the E90–E94 electronic communication/configuration warnings. The code alone does not identify a failed board or justify ordering a replaceme...
AEG Washer Dryer Error Code E91: Electronic Communication Fault
AEG groups E91 with the E90–E94 electronic communication/configuration warnings. The code alone does not identify a failed board or justify ordering a replaceme...
AEG Washer Dryer Error Code E92 Troubleshooting and Meaning
AEG groups E92 with the E90–E94 electronic communication/configuration warnings. The code alone does not identify a failed board or justify ordering a replaceme...
AEG Washer Dryer Error Code E93: Electronic Configuration Fault
AEG groups E93 with the E90–E94 electronic communication/configuration warnings. The code alone does not identify a failed board or justify ordering a replaceme...
Frequently asked questions
How do I find the right AEG Washer-dryers code?
Match the on-display code to the list below. If several spellings appear, prefer the highest-quality verified guide.
What is E10 on a AEG Washer-dryers?
E10 usually means the washer-dryer is not receiving enough water or has detected a related drainage restriction. It is not, by itself, evidence of a drying-system fault. The exact meaning and limits can vary by model and region, so confirm the code in the manual for your appliance using its model and PNC number.
What is C1 on a AEG Washer-dryers?
Error code C1 indicates that the washer dryer is unable to take in water, is filling too slowly, or has encountered a drainage or pressure-sensing problem. It corresponds to modern code E10 or a single beep/flash pattern.