Maytag Washing machines error codes
Verified error codes, explanations, and safe checks for Maytag Washing machines.
6 verified guides · 1 device groups
Before you start
- Note the full display code and model number, not only the brand.
- Compare the summary below with what your appliance is doing. A different code or symptom needs a different guide.
- Open the guide sources and check their device and model scope. Follow only checks intended for the owner.
This directory lists verified fault codes for Maytag Washing machines. Each card opens a full guide with likely causes, owner-safe checks, and a clear stop point for professional service.
Match the code on the display, or browse by verification quality. Use the links below to return to all Maytag devices or every brand under Washing machines.
All guides in this directory
Sorted by verification quality score.
Maytag Washing Machine Error Code Sd: Excessive Suds Detected
The Sd (or Sud / 5d) code indicates that the washer has detected excessive suds in the drum. The machine cannot spin out water with excess foam, so it pauses tu...
Maytag Washing Machine Error Code F5 E2: Door or Lid Lock Failure
Error code F5 E2 indicates that the washer cannot properly lock the door (front-load models) or lid (top-load models). The machine cannot safely fill, tumble, o...
Maytag Washer F7 E1 Error Code: Motor Speed or Tachometer Signal Problem
Maytag F7 E1 does not have one universal meaning across all washers. On front-load models, it indicates a motor speed-sensing error: the motor is not reaching t...
Maytag Washing Machine Error Code F8 E1: Water Fill or Flow Detection Fault
The F8 E1 code indicates that the washer is not detecting incoming water or is filling too slowly. It is typically triggered by closed supply taps, kinked inlet...
Maytag Washing Machine Error Code F8 E2: Dispenser System Fault
Error code F8 E2 indicates a dispenser system fault on front-load washers. It occurs when the dispenser mechanism or motor cannot reach its target position, mos...
Maytag Washing Machine Error Code F9 E1: Long Drain
Error code F9 E1 (or F9E1) indicates a drain timeout or long drain condition, meaning the washer took longer than expected—typically over eight minutes—to pump...
Frequently asked questions
What is Maytag Sd or Sud?
Sd / Sud usually means excess suds stopped the spin. Reduce detergent, run a rinse/drain cycle if safe, and avoid HE-incompatible soap.
What does F8 E1 mean on a Maytag washer?
F8 E1 commonly points to a fill or flow detection fault—closed taps, kinked hoses, or inlet issues. Follow the dedicated Maytag guide before replacing parts.
Should I clear a Maytag code by forcing a reset only?
A reset can clear a stale alert, but if the underlying fill, drain, or door-lock problem remains, the code will return. Fix the cause first.