Does this guide apply to your appliance?

Match the brand, device type and complete display code. The same code can mean something different on another product family or market; a series name does not confirm every model in that series.

Model and family references in this record:

LG tCLLG Tub Clean reminder

Likely causes

  • The washer has reached its scheduled Tub Clean interval.
  • A Tub Clean cycle has not yet been completed after the reminder appeared.
  • The reminder was dismissed by selecting another cycle or pressing another button; it may return when cleaning is due again.
  • If the code remains after a correctly completed Tub Clean cycle, the model may require manual-specific guidance or service, especially if other symptoms are present.

What to try

Run the Tub Clean cycle

Easy
  1. Remove all clothing and other items from the drum or tub.
  2. Check the washer’s exact model manual and the cleaner label for the correct cleaner and amount.
  3. Add the compatible washing-machine or tub cleaner as directed.
  4. Select Tub Clean and press Start or Start/Pause, using the button names shown on your model.
  5. When the cycle finishes, leave the door or lid open so the tub can dry.

Source for this check: www.lg.com

Dismiss the reminder temporarily when cleaning cannot be run immediately

Easy
  1. Select another available wash cycle or press another control, if your model permits it.
  2. Understand that this only dismisses the notification temporarily; it does not clean the tub.
  3. Run Tub Clean as soon as practical, following the exact model manual.

Source for this check: www.lg.com

Get model-specific help or service if the reminder persists

Professional

This is a service referral, not a do-it-yourself repair procedure.

  1. Confirm that the Tub Clean cycle completed normally and that the correct cleaner and procedure were used.
  2. Check the manual for the exact model because button names, cleaner recommendations, and reminder behavior vary.
  3. If tCL or tcL still appears—particularly with a failure to start, unresponsive buttons, another code, or abnormal noise—stop troubleshooting and contact LG or a qualified appliance technician.
  4. Do not remove panels or attempt internal electrical diagnosis.

This step is marked professional. Stop if you are not qualified to continue.

Source for this check: www.lg.com

The code returned or the check did not help?

Avoid repeated resets and do not select a replacement part from the code alone. Record the exact code, full model number, when it appeared, and the checks you tried with their results. Share these details with the manufacturer or service technician.

Disconnecting power does not establish that internal components are safe to touch. This guide does not authorize opening electrical components or bypassing safety devices.

Related error codes

LG OELG washer OE error: drainage failure troubleshooting LG UELG washing machine UE error: unbalanced load LG CLLG washing machine CL code: Child Lock or Control Lock is active LG LELG washing machine LE error: motor locked or tub cannot rotate LG dELG Washing Machine Error Code dE (Door Lock Error) LG SudLG Washing Machine Sud / SUD Error Code

Useful guides

Washing Machine Will Not Drain: Safe Checks Before Booking a TechnicianA blocked filter, kinked hose, plumbing restriction, unbalanced load, or excess suds can stop a washer from dr... Why Your Washing Machine Shakes or Moves—and Safe Leveling ChecksShaking can come from an uneven load, shipping bolts left in place, or an unstable floor. Try these safe check... Too Much Foam in Your Washer: Safe Steps to TakeExcess suds can lengthen a cycle, interfere with spinning and leave laundry wet or poorly rinsed. Check your d...

References