Does this guide apply to your appliance?
Match the brand, device type and complete display code. The same code can mean something different on another product family or market; a series name does not confirm every model in that series.
No exact model number is recorded here. Confirm the code in your appliance manual before following a check.
Likely causes
- Flow meter malfunction detecting water intake.
- Clogged inlet filter restricting water flow.
- Low incoming water pressure to dishwasher.
- Faulty or stuck water inlet valve.
- Kinked or blocked water inlet hose.
- Partially closed water supply valve.
What to try
Check and Ensure Water Supply is Open
Easy- Locate water supply valve under the sink connected to the dishwasher.
- Confirm the valve is fully open to allow water flow.
- If partially closed, fully open valve and run dishwasher to see if error clears.
Inspect and Straighten Water Inlet Hose
Easy- Locate the dishwasher water inlet hose, typically behind the dishwasher.
- Check the hose for any bends, kinks, or blockages that may restrict water flow.
- Straighten any bends and clear visible blockages if safe to do so.
- Run the dishwasher and check if error persists.
Clean the Inlet Filter
Moderate- Turn off water supply valve before proceeding.
- Locate the water inlet filter on the water hose connection to the dishwasher (refer to user manual for exact location).
- Remove the filter carefully and clean it by rinsing off accumulated debris.
- Reinstall the filter securely and turn water supply back on.
- Run dishwasher to verify if error E14 clears.
This step is marked caution. Stop if you are not qualified to continue.